EOC Slave  (DT-OEC-S4FE),RF interface:1*TV(RF signal) OUTPUT, inch F connector,1*CABLE(MIX)INPUT, inch F connector,Ethernet interface:4*10/100M auto-negotiation, RJ45

,RF parameters:Frequency:7.5-65MHz,Output level:115±5dBuv,Receive sensibility:65dBuv,Return loss:>16dB,Output impedance:75Ω,Transmission:PHY Layer:500Mbps Throughput

 on MAC Layer:320Mbps,Modulation Mode:OFDM– 2690-carriers 4096/1024/256/64/16/8-QAM, QPSK, BPSK, ROBO,Dimension:150*116*28mm,Weight:0.5kg.Frequency Division:

 (5~35MHz / 47~860MHz) or (5~42MHz / 54~860MHz) or (5~65MHz / 87~860MHz) is Optional.

★Features

⊙Support data encryption

⊙Support on-line upgrading

⊙PHY Layer speed 500Mbps

⊙Support bandwidth limited

⊙Support data packages count

⊙Support broadcast storm control.

⊙4*100M auto-negotiation Ethernet port

⊙Support WEB,CLI and SNMP management

⊙Support Port-based VLAN and 802.1q VLAN

⊙Support the isolation of slave under one master

⊙Based on HomePlug AV solution and Mstar chipset

⊙Support QOS configuration based on slave port or VLAN.

⊙7.5-65Mhz frequency for EOC signals., no influence on CATV Service

⊙Automatically get configurations from EOC Master when Newly connected with powered on