Specializing in R&D & Production in xPON & Optical Communication & CATV & Ethernet Networking
HANGZHOU DAYTAI NETWORK TECHNOLOGIES CO.,LTD.
DAYTAI-HANGZHOU-CHINA
Tel:
+86-571-8735 7725-Español
+86-571-8735 7726-English
+86-571-8735 7727-English
+86-571-8735 7728-English
Fax : +86-571-8735 7798
Mr.Amani
Skype:daytai-amani
Mobile:+86-137 7755 3827
WeChat:+86-180 7288 6827
E-mail:info@daytai.com
Web Site:WWW.DAYTAI.COM
2600L Satellite Optical Receiver (DT-SAT-OR2600L),Optical
wavelength:1290~1600nm,Input optical power:-9~0dBm,
Optical input channel:1,Return loss:≥50dB,Optical
connector:SC/APC or FC/APC
2600L Satellite Optical Receiver (DT-SAT-OR2600L),Optical wavelength:1290~1600nm,Input optical power:-9~0dBm,Optical
input channel:1,Return loss:≥50dB,Optical connector:SC/APC or FC/APC,Optical receiver type:PIN,RFOperation bandwidth MHz
950~2600 :950~2600MHz,RF output level range:-25 ~ -40dBm,RF output channel:1,Third order intermodulation1):≥55dB,Equivalent
noise factor:>115dB/Hz,Operation temperature:0~+50℃,Dimension :483×370×44(mm),Power consumption:8W,Power
Supply:110~265V,American Standard or European Standard Power Plug is optional.
★Features
⊙Standard 19” structure, easy to install and use.
⊙Front panel LCD provides status display and fault diagnosis.
⊙Optical transmitter is equipped in RF AGC circuit, with wide RF input level range.
⊙Optical transmitter provide LNB with 13V or 17V power supply through RF input port.
⊙950~2600MHz operation bandwidth, suitable for transmitting L-band satellite signal.
⊙Optical transmitter adopts MQW-DFB laser, to ensure the unit high index and high reliability.
Optical | |||
Optical wavelength | nm | 1290~1600 | |
Input optical power | dBm | -9~0 | |
Optical input channel | 1 | ||
Return loss | dB | ≥50 | |
Optical connector | SC/APC or FC/APC | ||
Optical receiver type | PIN | ||
RF | |||
Operation bandwidth | MHz | 950~2600 | |
RF output level range | dBm | -25 ~ -40 | |
RF output channel | 1 | ||
In-band flatness | dB | ±2.0dB | 950~2600MHz |
dB | ±0.3dB | Any 36MHz bandwidth | |
Input impedance | Ω | 75 | |
RF return loss | dB | 10 | |
RF connector | FL10 | ||
System | |||
Third order intermodulation1) | dB | ≥55 | |
Equivalent noise factor | dB/Hz | >115 | |
General | |||
Power | V | 110~265V | |
Operation temperature | ℃ | 0~+50 | |
Relative humidity | % | 5~95 | |
Dimension | mm | 483×370×44 | |
Power consumption | W | 8 |
Note:
1)Third order intermodulation represents the ratio of carrier signal peak to the third-order beat peak when using two-way carrier frequency test (1.0GHz and 1.1GHz)
Previous:No more