Home > Optical Passive Products > Fiber Optic Splice Closure > 6~96 Core Fiber Optic Splice Closure,3 inlet+3 outlet (DT-FOSC-H8002)
6~96 Core Fiber Optic Splice Closure,3 inlet+3 outlet (DT-FOSC-H8002)

Description 

Fiber Optic Splice Closure,Horizontal Type (DT-FOSC-H8002),Number of ports:6 (pieces)inlet/outlet,Diameter of fiber cable:Max.Φ20 (mm),Capacity of FOSC:Bunchy: (6~96(Cores),Max.Capacity:96 Cores.12 or 24 core splice tray is optional,Outside Dimension(LxWxH): 323mm×210mm×85mm


Scope of application

This Installation Manual is suit for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.

 

The scope of application is: aerial, underground, pipeline, handhole. The ambient temperature ranges from -40 to 65℃.

 

Basic structure and configuration 

1.1 Dimension and capacity

Outside dimension (LxWxH)

320×210×85 (mm)

Weight (excluding outside box)

2650g  2800g

Number of inlet/outlet ports

3 (pieces) on each side 

Diameter of fiber cable

Φ8—Φ20 (mm)

Capacity of FOSC

Bunchy: 12120 (Cores)

 

1.2 Main components

No.

Name of components

Quantity

Usage

Remarks

1

Housing

1 set

Protecting fiber cable splices in whole

Internal diameter:

240x148x76(mm)

2

Fiber optic splice tray

(FOST)

Max 8 pieces (bunchy)

 

Fixing heat shrinkable protective sleeve and holding fibers

Suitable for:

Bunchy: 12,24, (cores) 

3

Seal fitting

1 set

Sealing between FOSC cover and FOSC bottom


4

Port plug

6 pieces

Sealing empty ports


6

Pressure

testing valve

1 set

After injecting air, it is used for pressure testing and sealing testing

Configuration as per requirement

7

Earthing deriving device

1 set

Deriving metallic components of fiber cable in FOSC for earthing connection

Configuration as per requirement

 

 

 

1.3 Main accessories and special tools

No.

Name of accessories

Quantity

Usage

Remarks

1

Heat shrinkable protective sleeve


Protecting fiber splices

Configuration as per capacity

2

Nylon tie


Fixing fiber with protective coat

Configuration as per capacity

3

Insulation tape

1 roll

Enlarging diameter of fiber  cable for easy fixing


4

Desiccant

1 bag

Put into FOSC before sealing for desiccating air.


5

Seal tape

1 roll

Enlarging diameter of fiber  cable which fits in with seal fitting

Configuration as per specification

6

Hanging hook

1 set

For aerial use


7

Earthing wire

1 piece

Putting through between earthing devices


8

Abrasive cloth

1 piece

Scratching fiber cable


9

Labeling paper

1 piece

Labeling fiber


10

Special wrench

2 pieces

Fixing bolts, tightening nut of reinforced core


11

Measuring paper

1 piece

To measure circle, of which its diameter is enlarged with seal tape


12

Buffer tube

 

To be decided by customers

Hitched to fibers and fixed with FOST, managing buffer

Configuration as per requirement

 

Necessary tools for installation

2.1 Supplementary materials (to be provided by operator)

Name of materials

Usage

Scotch tape

Labeling, temporarily fixing

Ethyl alcohol

Cleaning

Gauze

Cleaning


2.2 Special tools (to be provided by operator)

Name of tools

Usage

Fiber cutter

Cutting off fibers

Fiber stripper

Strip off protective coat of fiber cable 

Combo tools

Assembling FOSC


2.3 Universal tools (to be provided by operator)

Name of tools

Usage and specification

Band tape

Measuring fiber cable

Pipe cutter

Cutting fiber cable

Electrical cutter

Take off protective coat of fiber cable

Combination pliers

Cutting off reinforced core

Screwdriver

Crossing/Paralleling screwdriver

Scissor


Waterproof cover

Waterproof, dustproof

Metal wrench

Tightening nut of reinforced core

 

2.4  Splicing and testing instruments (to be provided by operator)

Name of instruments

Usage and specification

Fusion Splicing Machine

Fiber splicing

OT DR

Splicing testing

Provisional splicing tools

Provisional testing

 

Notice: The above-mentioned tools and testing instruments should be provided by the operators themselves.


Fiber Optic Splice Closures (FOSC) inspecting and testing items

Inspecting  item

Technical Requirements

Inspecting type

Routine test (Before leaving factory)

Type test

Package

Each small package contains one fiber optic splice closure, together with its accessories, tools, installation manual and packing list.

full

At least 3 sets sampled each time

Appearance

Intact in shape, no burrs, bubbles, chaps, pores, warps, impurities and other defects, all background colors should be even and continual.

Sign

There is a clear sign on the housing, such as name and model of the product, etc.

Fiber storage device

The fibers reserved are to be winded in fiber optic splice tray (FOST), the length of fibers housed in FOST is >1.6m, the curved radius is >30mm. During the installation and maintenance, there should be no attenuation on fibers.  

At least 3 sets sampled each time

Electrical jointing device

Inside FOSC: metallic components of fiber cables has the functions of electrical putting through, earthing connection and disconnecting. It is possible to install earthing deriving device outside the housing

Sealing performance

After sealing according to the stipulated operation procedures, the injected air pressure is 100KPa±5Kpa, when immersed in clean water of normal temperature for 15 minutes, there should be no air bubbles, then observed for 24 hours, there should be no change of air pressure.

Re-sealing performance

After reopening and resealing according to the stipulated operation procedures, the injected air pressure is 100KPa±5Kpa, when immersed in clean water of normal temperature for 15 minutes, there should be no air bubbles, then observed for 24 hours, there should be no change of air pressure.

Pull

Bearing pull is  800N at axle orientation, there should be no breakage on the housing.

Punching

Bearing pressure of 2000N/10cm for 1 minutes, there should be no breakage on the housing

Impact

Bearing impact energy of 16Nm, 3 times of impacts there should be not breakage on the housing

Bending

The spot between the FOSC and seal fitting can bear bending tension of 150N at bending angle of ±450 for 10 circles, there should be no breakage on the housing

At least 3 sets sampled each time

At least 3 sets sampled each time

Torsion

Bearing torsion 50Nm, 10 circle at torsion angle±900,

There should be no breakage on the housing.

Temperature circle

Injected air pressure of 60KPa±5 KPa, the temperature circle ranging from -40~+65, 10 times of the circular tests (one circular consists of high temperature for 2 hours + indoor temperature for 2 hours + low temperature for 2 hours + indoor temperature for 2 hours ) when the pressure declines, the amplitude is 5Kpa, immerse the swatch in clean water of normal temperature for 15 minutes, there should be no air bubbles.

Voltage resistance strength

After sealing the FOSC according to the stipulated operation procedures, immerse it in clean water of normal temperature in 1.5m depth for 24 hours, there should be no breakdown or arc over between the metallic components of the FOSC, between metallic components and the ground at DC 15KV for 1 minutes.

Isolating resistance

After sealing the FOSC according to stipulated operation procedure, immerse it in clean water in 1.5m depth for 24h, the isolating resistance between the metallic components of the FOSC, between the metallic components and the ground should be  2×104MΩ.