Specializing in R&D & Production in xPON & Optical Communication & CATV & Ethernet Networking
HANGZHOU DAYTAI NETWORK TECHNOLOGIES CO.,LTD.
DAYTAI-HANGZHOU-CHINA
Tel:
+86-571-8735 7725-Español
+86-571-8735 7726-English
+86-571-8735 7727-English
+86-571-8735 7728-English
Fax : +86-571-8735 7798
Mr.Amani
Skype:daytai-amani
Mobile:+86-137 7755 3827
WeChat:+86-180 7288 6827
E-mail:info@daytai.com
Web Site:WWW.DAYTAI.COM
DAYTAI Indoor DVB-T Digital Transmitter,(DT-DVB-T-IDT) is a professional DVB-(T)/ATSC digital transmitter researched and
developed, which gives sustained power output. Its compact structure design has greatly saved space for your room. It is
DAYTAI Indoor DVB-T Digital Transmitter,(DT-DVB-T-IDT) is a professional DVB-(T)/ATSC digital transmitter researched and
developed, which gives sustained power output. Its compact structure design has greatly saved space for your room. It is
applicable to both SFN and MFN network modes and supports both signal-carrier mode and multi carrier-mode. Signal
channel and broadband transmission are supported.The frequency range of DT-DVB-T-IDT is from 470MHz~806MHz.
This transmitter has a very high linear and high reliability as it takes high gain and high linear LDMOS tube amplifier
module. Furthermore, it supports AGC function to keep sustained power output. DT-DVB-T-IDT DVB-(T)/ATSC
digital transmitter can be widely used in HD/SD digital TV signal transmitting and broadcasting system.
★Features
⊙Support fault self-diagnosis
⊙Support MFN and SFN system
⊙Easy to install, elegant appearance
⊙Enhanced signal transmission quality
⊙LED on the front panel support alarm and signal monitor
⊙Stabilized-power supply with wide range of voltage and high efficiency
⊙Multi lightning protection measures, good protection for whole equipment.
⊙24-hour working unmanned, user friendly design
⊙Intelligent and modularized amplifier unit, takes high power gain and high linear
LDMOS tube amplifier module design
⊙Low power consumption and super linear design to improve the transmission power,
and reduce the nonlinear distortion
⊙Support AGC function with sustained power output to allow the transmitter
a good stability and reliability
Item | Spectiation | |
Basic Parameters | TV Standard | /DVB-(T)/ATSC |
Modulating mode | 4/16/32/64 QAM | |
Frequency stability (3 months) | External Frequency Range: ≤10-10 | |
Internal Frequency Range: ≤10-7 | ||
Frequency accuracy | MFN: ±100Hz / SFN: ±1Hz | |
Local oscillator phase noise | See table above | |
In-band stray | ≤-60dBc | |
In-band ripple (fc±3.591MHz) | ±0.5dB | |
Out-of-band rejection | ≤-65dBc | |
Input | Frequency range | 470MHz~806MHz (any 100MHz bandwidth) |
level | -20±3dBm | |
Input reflection loss | ≥15dB | |
connector | N-K | |
Output | Output power | 10W, 20W, 30W, 50W, 100W Optional |
Frequency range | 470MHz~806MHz (any 100MHz bandwidth) | |
Output impedance | 50Ω | |
In-band ripple (fc±3.591MHz) | ±0.5dB | |
Shoulder level | ≥40dB@central frequency FC±4.2MHz (after correction, single channel) | |
MER | ≥35dB (after correction, single channel) | |
output reflection loss | ≥26dB | |
Output power variation | ±0.25dB | |
Inner adjacent channel transmission power | Inner adjacent channel transmission power : in-band transmission power≤-60dB, meet that Inner adjacent channel transmission power≤13mW | |
External adjacent channel transmission power | External adjacent channel transmission power : in-band transmission power≤-65dB, meet that Inner adjacent channel transmission power≤13mW | |
Environment condition | Working temperature | -20~+50℃ |
Storage temperature | -30~+75℃ | |
Relatively humidity | <95%(no condensation at 25℃) | |
atm press | 86~106kPa | |
power supply | AC,220V±10%/50Hz | |
10W-30W | 482mmx395mmx132mm | |
50W-100W | 482mmx222mmx564mm |
Previous:1.5KW-3KW DVB-T Digital Transmitter
Next:No more